.LINKSYS EXTENDER SETUP


Linksys extender setup is the best cure for poor WiFi signal intensity problems in the home or workplace. Extender.linksys.com is one of the leading wireless extension manufacturers, which is not only easy to set up but also equally easy to manage. If you are trying to set up a new extender setup. Here are the following steps to set up your wifi range extender setup.




EXTENDER LINKSYS SETUP (PRE-REQUIRES)


Linksys extender setup repeats the wireless signal of all routers and provides the best connectivity in hard to reach areas. In order to set up your new extender setup here’s the list of essentials.


  1. The Linksys extender setup must be plugged in.

  2. Remember your existing router’s wireless setting i.e. SSID or wireless name, your wifi password, or network/security key.

  3. Restore your wifi range extender setup.

  4. You must need working on the internet.


So, these are the necessary setup you want to remember to set up your Extender.linksys.setup. So, there are two methods to set up your Linksys extender setup: Manual and WPS. Both methods are given below for your new extender setup.


LINKSYS EXTENDER SETUP: MANUAL METHOD


Setting up Linksys extender setup manually?  Here’s the step below 


  1. Bring your computer or laptop and Linksys extender setup in the same room.

  2. Connect your computer with an extender through an ethernet cable.

  3. Now plug your computer and new extender setup into an electrical outlet or socket.

  4. Open your browser and type extender.linksys.com in the URL bar.

  5. A login page will open into view, and enter your login details.

  6. When your Linksys extender setup screen appears, type the network name (SSID) of your router in the required options.

  7. After That, select the manual option and turn off the extender for some time. Now turn on your wifi range extender setup.


If you are still facing any technical issues in your Linksys extender setup don’t forget to call our expert on 1-866-988-7692.


LINKSYS EXTENDER SETUP: WPS METHOD


Wi-fi protected setup (WPS) is a security standard for a wireless network that is useful for making a proper connection between the wireless device and extender. There are two ways to set up your new extender setup by using WPS. You can use the WPS button on the extender or either you can log in to the web-based Linksys extender setup.


  1. USING WPS BUTTON 


Follow the given below steps for Linksys extender setup using the WPS button:

  1. Plug your wifi range extender setup into an electrical socket.

  2. Press the WPS button on the new extender setup. 

  3. Check the WPS LED on your devices as it shows the status of your Linksys extender setup.

  4. Make sure the power lights are lit on the extender that means your extender is configured with your router.

  5. When the power light becomes solid green that means your extender is connected with your router.


      b)   USING THE WEB-BASED WPS 


There are three options to set up with web-based WPS, namely: WPS button, use of WPS pin, and using the router’s pin


  1. WPS BUTTON 

Open your web browser and search extender.linksys.com and click on the wireless> WPS button, after that press on the WPS button on your extender for processing your wifi setup. After that, click on the enable button, and your extender getting connected with your router.


  1. USING THE WPS PIN

If your device requires a WPS pin, input the serial number on your extender into the linksys extender setup web-based page. 


  1. USING THE ROUTER’S PIN

In case your computer requires a router’s pin, input the number on the third column on the extender Linksys setup web-based page.


Comments

Post a Comment